|
| |
TM 10-4320-342-24
2-41. ENGINE GEAR BOX OIL DRAIN VALVE REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
200/600 GPM pump assembly removed from
Item 1)
system (Para 2-9, TM 10-4320-342-10)
Engine Gear Box Oil drained
Material/Parts
(LO 10-43210-342-12)
Antiseize Tape (App E, Item 6)
a. REMOVAL. Refer to Figure 2-66.
(1)
Open door (1).
(2)
Disconnect tubes (2 and 3) from adapter (4) and elbow (5).
(3)
Remove adapter (4) and elbow (5) from valve (6).
NOTE
Install antiseizing tape (teflon tape) on all male threads and wrap tape in direction
of threads. Do not allow teflon tape to extend beyond end of threads.
b. INSTALLATION.
(1)
Install adapter (4) and elbow (5) on valve (6).
(2)
Position valve (6) in unit and connect tubes (2 and 3)
(3)
Close door (1).
2-158
|
