|
| |
TM 10-4320-342-24
2-39. FUEL BOOSTER PUMP REPAIR - continued.
d. ASSEMBLY. Refer to Figure 2-64.
(1)
Install brushes (16) and caps (15) in pump (4).
NOTE
Install antiseizing tape (teflon tape) on all male threads and wrap tape in direction
of threads. Do not allow teflon tape to extend beyond end of threads.
(2)
Install elbow (14) in fuel boost pump (4).
(3)
Install preformed packing (13) on strainer (12).
(4)
Install strainer (12) on pump (4).
(5)
Install adapter (11) in strainer (12).
e. INSTALLATION.
(1)
Position pump (4) on bracket (10) and install bolts (9), washers (8) and nuts (7).
(2)
Connect tubes (5 and 6) to pump (4).
(3)
Connect electrical connector (3) to pump (4).
(4)
Close doors (1 and 2).
2-155
|
