|
| |
TM 10-4320-342-24
2-18. 200/600 GPM FUEL PUMP ASSEMBLY REPAIR - continued.
b.
REPAIR.
The repair of 200 or 600 GPM fuel pump consists of replacing the components listed below. Refer to the following
paragraphs for applicable maintenance procedures.
Procedures
Para
Male Flange Coupling Replacement ...............................
2-19
Discharge Elbow Replacement ......................................
2-20
Ball Valve and Discharge Adapter Replacement .............
2-21
Drain Tube Replacement...............................................
2-22
Female Flange Adapter Replacement ............................
2-23
Pump, Clutch and Wiring Harness Repair.......................
2-24
c.
INSTALLATION. Refer to Figure 2-38.
WARNING
Do not lift more than 50 pounds by yourself and bend legs while lifting. Lifting
heavy equipment incorrectly can cause serious injury to personnel.
CAUTION
When installing 200/600 GPM fuel pump, be careful not to damage drain line or
electrical wiring.
(1)
Position coupling clamp (8) on speed reducer (10).
(2)
Lift, slide and position fuel pump (9) on support plate (11).
(3)
Install coupling clamp (8) on 200/600 fuel pump (9) and speed reducer (10).
(4)
Install bracket (6) on bolt (7).
(5)
Torque nut (5) to 125 inch-pounds.
(6)
Install electrical connector (4).
(7)
Close doors (2 and 3).
(8)
Install cover (1).
2-106
|
