|
| |
TM 10-4320-342-24
2-18. 200600 GPM FUEL PUMP ASSEMBLY REPAIR
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
Personnel Required
General Mechanics Tool Kit (App B, Sect III,
Two people (200 GPM Pump)
Item 1)
Four people (600 GPM Pump)
Torque Wrench 0-300 inch-pounds (App B,
Sect III, Item 2)
Equipment Condition
Crowbar (App B, Sect III, Item 2)
200/600 GPM pump assembly removed from
Torque Wrench: 0-600 foot-pounds (App B,
system (Para 2-9, TM 10-4320-342-10)
Sect III, Item 2)
Nonmetallic Hose removed (Para 2-17)
Material/Parts
General Safety Instructions
General Purpose Detergent (App E, Item 1
WARNING
Do not lift more than 50 pounds by yourself and
bend legs while lifting. Lifting heavy equipment
incorrectly can cause serious injury to personnel.
NOTE
This procedure covers the 200 GPM fuel pump. (Replacement of the 600 GPM fuel
pump is similar.)
a.
REMOVAL. Refer to Figure 2-38.
(1)
Remove cover (1) and open doors (2 and 3).
(2)
Disconnect electrical connector (4).
(3)
Loosen nut (5), lift bracket (6) off bolt (7) and slide coupling clamp (8) from fuel pump (9) onto speed reducer (10).
WARNINGS
·
Do not lift more than 50 pounds by yourself and bend legs while lifting. Lifting
heavy equipment incorrectly can cause serious injury to personnel.
·
When removing pump, keep hands and arms from rear of pump. Pump will
drop slightly when it is removed and can cause injury to personnel.
CAUTION
When removing fuel pump, be careful not to damage drain line or electrical wiring.
2-104
|
