|
| |
TM 10-4320-342-24
2-10. TROUBLESHOOTING PROCEDURES - continued.
34.
UNABLE TO CHANGE INTENSITY OF ILLUMINATION LIGHTS.
Replace light switch S5 if this malfunction occurs.
35.
PUMP ASSEMBLY CONTINUES TO PRIME AFTER STARTUP.
NOTE
If this malfunction occurs, fuel/air mixture will continue to blow out of vent at top
of purge tank, unless and until manual priming valve is closed.
Close manual priming valve(TM 10-4320-342-10).
When mission is completed, replace pressure switch (Para 2-33).
2-90
|
