|
| |
TM 10-4320-324-14
b.
Disassembly
WARNING
Screen may be very hot if unit was run
recently. Let unit cool or use gloves to
remove screen. Failure to do so could
result in severe burns to personnel.
NOTE
Cage nuts should not be removed unless damaged.
(1)
Remove two screws (1), two flat washers (2),
and screen (3).
(2)
Remove eight screws (4), eight lockwashers (5),
eight flat washers (6), and eight cage nuts (7).
(3)
Remove two screws (8), two lockwashers (9),
two flat washers (10), two cage nuts (11), and
cooling air outlet (12).
(4)
If damaged, remove insulation (13 through 16).
(5)
Remove two screws (17), two lockwashers (18),
two flat washers (19), two cage nuts (20), and
cooling air outlet panel (21).
(6)
Remove six screws (22), six lockwashers (23),
six flat washers (24), six cage nuts (25), and end
panel (26) from cooling air outlet duct (27).
(7)
If damaged, remove insulation (28 through 31).
4-23
|
