|
| |
TM 10-4320-324-14
4-10. Identification Plates and Reflectors Replacement (CONT).
(4)
If damaged or illegible, drill out four rivets (7) and remove information plates (8).
(5)
If damaged or illegible, drill out four rivets (9) and identification plate (10).
(6)
If damaged or illegible, remove four screws (11) and information plate (12).
(7)
If damaged or illegible, drill out four rivets (13) and remove instruction plate (14).
(8)
If damaged or illegible, remove instruction plate (15).
(9)
Remove eight nuts (16), eight lockwashers (17), eight screws (18), and reflectors (19 and 20).
b.
Cleaning/Inspection.
(1)
Inspect identification and instruction plates for illegible print or other obvious damage. Replace if defective.
(2)
Inspect reflectors for breakage or other obvious damage. Replace if defective.
c.
Installation.
(1)
Install reflectors (19 and 20) using eight screws (18), eight lockwashers (17), and eight nuts (16).
(2)
If removed, install instruction plate (15).
4-20
|
