|
| |
TM 10-4320-324-14
3-8. Service Engine Assembly.
NOTE
Normally, new engines have a higher oil
consumption. During the breaking-in period,
approximately
200
operating
hours,
it
is
essential to check oil level more frequently.
One check is sufficient after the breaking-in
period.
a.
Ensure engine is in a level position.
b.
Pull out dipstick (1), and wipe it clean with a
nonfraying rag.
c.
Replace dipstick (1) pushing it in as far as it will go;
then, withdraw it again.
d.
Check oil film left on dipstick. It should extend to
upper mark (2).
e.
If level only reaches to lower level (3), remove filler
cap (4), refer to Lubrication Order, LO 10-4320-324-
12 and fill to proper level.
3-13
|
