|
| |
TM 10-4320-324-14
(47) Apply silicone sealer to inside of front cover
(5) and install front cover (5) on crankcase
(20) using three flat washers (19), bolts (18),
one lockwasher (17), bolt (16), lockwasher
(15), bolt (14), four lockwashers (13), bolts
(12), two flat washer (11), and bolts (10).
(48) Install four washers (9), one motor mount (8),
four washers (7), and screws (6).
NOTE
Bolt securing v-belt pulley has left-hand threads.
(49) Install v-belt pulley (4) using flat washer (3)
and bolt (2). Preload bolt to 36.9 lb-ft (50
N.m). Stage 1 angle is 210°. Total is 210°.
6-31
|
