|
| |
TM 10-4320-324-14
6-7. Engine Assembly Repair (CONT).
WARNING
Spring is under tension and can act as a
projectile when tension is suddenly released.
Injury to personnel can result.
(8)
Remove plug (21), spacer (22), cap (23) and
spring (24) from front cover (5).
(9)
Remove plug (25), plug (26), and preformed
packing (27). Discard preformed packing.
(10) Remove three bolts (28), three flat washers
(29), one cover (30), and preformed packing
(31). Discard preformed packing.
(11) Remove dowel sleeve (32).
(12) Press out shaft seal (33).
(13) Remove bolt (34) and flat washer (35).
(14) Carefully rotate engine over on injection pump
side.
(15) Remove three long bolts (36), eleven short
bolts (37), eleven lockwashers (38), and
housing adapter (39) from crankcase (20).
Discard lockwasher.
6-10
|
