|
| |
TM 10-4320-324-14
NOTE
Check to ensure gasket is properly aligned before installing bonnet.
(4)
Place valve in open position and install bonnet (11) with eight screws (10), eight lockwashers, and eight
nuts (9). Tighten nuts to 44 - 48 lb-ft (60 - 65 N.m).
(5)
Install packing (7), packing retainer (6), spring (5), and packing nut (4).
(6)
Install handwheel (3), information plate (2), and wheel nut (1). Tighten nut 44 - 48 lb-ft (60 - 65 N.m).
d.
Follow-on Maintenance. Install front valve covers (para 4-17).
END OF TASK
5-95
|
