|
| |
TM 10-4320-324-14
5-19. Engine Cowlings (CONT).
c.
Installation
(1)
If removed, install grommets (22 and 23) in
guide rail (21).
(2)
Place guide rail (21) on engine and secure
with six bolts (19) and six lockwashers (20).
(3)
Position rubber seal (18) and air cowling base
(17) and install two flatwashers (16), two
lockwashers (15), and two bolts (14).
(4)
Install oil cooling coil (para 4-21).
(5)
If removed, install grommets (13) in plate (5).
(6)
Position plate (5) in place and secure to air
cowling base (17) with bolt (10), lockwasher
(11), and nut (9).
(7)
Install three bolts (6), lockwashers (7),
flatwashers (8), and plate (5) to engine.
(8)
Install two bolts (2), two lockwashers (3), and
two flatwashers (4) in plate (5).
(9)
Install duct part (1) and latch in position.
d.
Follow on maintenance
(1)
Connect fuel lines (para 4-41).
(2)
Install cooling fan (para 5-20).
END OF TASK
5-62
|
