| |
TM 10-4320-324-14
(4)
Remove two self-locking nuts (7), four washers (8), two beveled washer (9), and two screws (10).
(5)
Remove four self-locking nuts (11), eight washers (12), four beveled washers (13), and screws (14).
(6)
Install two lifting eyes (15) in top of engine crankcase.
(7)
Attach hoist capable of lifting at least 300 pounds to lifting eyes (15).
(8)
Slowly raise hoist until weight of engine assembly is on straps and lifting device clears mounts.
(9)
Carefully pull engine assembly back, away from pump, until flexible coupling disengages from connection
ring.
(10)
Pull engine assembly completely clear of intermediate bracket.
(11)
Carefully raise engine assembly clear of frame and place on adequate stand.
b.
Cleaning/Inspection.
(1)
Inspect all sheet metal parts for excessive rust, holes, or other obvious damage.
(2)
Replace all damaged parts.
5-51
|