|
| |
TM 10-4320-324-14
5-14. Injection Pump Replacement (CONT).
b. Removal.
NOTE
Cap or plug all fuel lines, hoses, fittings, and open fuel ports to prevent contamination of fuel system.
(1)
Remove banjo bolt (1), two washers (2), and banjo fitting (3).
(2)
Remove overflow valve bolt (4), washer (5), banjo fitting (6), and sealing ring (7).
(3)
Remove three fuel injection lines (8, 9, and 10).
(4)
Manually rotate engine clockwise until No. 1 injection pump element (element closest to governor end of pump)
is in upper position and crankshaft pulley is located on TDC mark.
5-32
|
