|
| |
TM 10-4320-324-14
NOTE
Drain any remaining liquid from the
valves into a suitable container before
starting removal procedures.
a.
Removal.
(1) Removal of four coupling halves (4).
(a) Remove eight nuts (1), eight lockwashers
(2), and eight screws (3).
(b) Remove coupling half (4) and gasket (5).
(c) Remove nut (6), lockwasher (7), two
washers (8), bevel washer (9), screw (10),
and bracket (11).
4-169
|
