|
| |
TM 10-4320-324-14
4-53. Oil Drain Hose Replacement (CONT).
b.
Cleaning/Inspection.
WARNING
Dry cleaning solvent P-D-680 is toxic and
flammable. Wear protective goggles and
gloves and use only in a well ventilated
area. Avoid contact with skin, eyes, and
clothes and don't breathe vapor. Do not
use near open flame or excessive heat.
The flash point is 100F-138F (38°-
50°C). If you become dizzy while using
cleaning
solvent,
get
fresh
air
immediately and get medical aid. If
contact with eyes is made, wash your
eyes with water and get medical aid
immediately.
(1) Clean all metal parts with dry cleaning solvent
P-D-680.
(2) Inspect all parts for damage. Replace defective
parts.
c.
Installation.
(1) Install copper washer (3), oil hose (2), nipple (5),
locknut (4), and cap (1).
(2) Fill engine with oil (LO 10-4320-324-12).
END OF TASK
4-160
|
