|
| |
TM 10-4320-324-14
e.
Installation.
(1) Position idler pulley assembly (11) on engine
and aline holes.
(2) Install flat washers (10 and 8), nut (9) and screw
(7), then tighten.
(3) Install screw (4), and spacer (2). Do not tighten.
(4) Raise pulley (3) and engage bracket (5) with
lever (6), then tighten screw (4) and spacer (2).
(5) Connect switch wires (1).
f.
Follow-on Maintenance.
(1) Install blower outlet extension (para 4-32).
(2) Install v-belt and pulley guard (para 4-31).
(3) Connect batteries (para 4-30).
END OF TASK
4-157
|
