|
| |
TM10-4320-324-14
4-46. Starting Aid Pump Replacement.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Tool kit, general mechanics: automotive, item 32,
section III, appendix B
a. Removal.
WARNING
Ether is extremely flammable. Do not remove
tube while smoking or near open flames.
Failure in doing so may result in damage to unit
and injury to personnel.
(1) Remove ether tube (1).
(2) Turn knob (2) counterclockwise and remove.
(3) Remove nut (3) and pump (4).
b. Installation.
(1) Install pump (4) with tube connection at twelve
o'clock position.
(2) Install nut (3).
(3) Install knob (2) With pump shaft pulled out and
nut on end of shaft held with wrench.
(4) Connect ether tube (1) to pump (4).
END OF TASK
4-145
|
