|
| |
TM 10-4320-324-14
4-38. Main Wiring Harness Repair/Replacement (CONT).
(4) Install three wires (12) and two screws (11)
on oil pressure switch (13).
(5) Install wire (9), flat washer (8), and nut (7)
on oil sending unit (10). Install low oil
pressure cut-out switch and oil pressure
sending unit as an assembly if removed
(para 4-56 and 4-57).
(6) Install two wires (5) and two screws (4) on
shutdown solenoid (6).
4-120
|
