|
| |
TM 10-4320-324-14
4-31. V-Belt Guard Replacement.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP:
Tools
Materials/Parts
Tool kit, general mechanics: automotive, item 32,
Lockwashers (2) - MS35338-44
section III, appendix B
Lockwashers (2) - 110-2802
a.
Removal.
(1) Raise cooling air compartment.
(2) Remove bolt (1), four flat washers (2 and 3), and spacer (4).
(3) Remove screw (5), two flat washers (6 and 7), and spacer (8).
(4) Remove bolt (9), lockwasher (10), and flat washer (11).
(5) Remove two screws (12), four flat washers (13 and 14), two lockwashers (15), and two nuts (16).
(6) Remove belt guard (17).
4-100
|
