|
| |
TM 10-4320-324-14
4-30. Batteries and Cables Replacement.
This task covers:
a. Removal
c.
Testing
e.
Follow-on Maintenance
b.
Cleaning/Inspection
d.
Installation
INITIAL SETUP:
Tools
General Safety Instructions
Tool kit, general mechanics: automotive, item 32,
Wear safety goggles and rubber gloves while
section III, appendix B
performing maintenance.
Materials/Parts
Wear personal protective equipment
Cloth, lint free, item 3, appendix E
when using cleaning solvent.
Grease, automotive and artillery, item 5,
appendix E
Do not wear any jewelry while performing
Solvent, dry cleaning, item 15, appendix E
maintenance. Jewelry can catch on equipment
Starwasher - MS35333-110
causing injury or can short out causing burns or
Lockwasher - 1102800
starting a fire.
Lockwasher (3) - MS35333-110
Do not short out battery terminals while
Equipment Condition
performing maintenance. Sparks can start a
fire.
Battery covers removed (para 4-29).
a.
Removal.
WARNING
Remove rings, bracelets, wristwatches, neck chains, and any other jewelry before working around vehicle.
Jewelry can catch on equipment and cause injury, or may short across an electrical circuit and cause severe
burns or electrical shock.
Be careful not to short out battery terminals. Do not smoke or use open flame near batteries. Batteries may
explode from a spark. Battery acid is harmful to skin and eyes.
CAUTION
Remove negative (-) battery cable first to prevent possible electrical arc. Failure to comply may result in
damage to batteries and/or cables.
NOTE
Tag all wires before removing.
4-96
|
