| |
TM 10-4320-324-14
4-22. Bottom Panel Repair/Replacement (CONT).
d.
Assembly.
(1)
Install two jack plugs (38).
(2)
Install two tie down seals (37) and two retainers (36) with eight screws (35), 16 washers (34), and eight self-
locking nuts (33).
(3)
Position bottom rear panel (32) and bottom front panel (18) together and secure using nine screws (31), 18
flat washers (30), nine lockwashers (29), and nine nuts (28).
(4)
Install valves (27) and retainers (26) using eight screws (25), 16 flat washers (24), and eight self locking
nuts (23).
(5)
Install grommets (19 thru 22).
(6)
Assemble tie down seal (17), flap (16), and retainers (9 thru 15).
(7)
Install pin assembly (8), four new self locking nuts (7), eight flat washers (6), and four screws (5).
(8)
Install 32 new self locking nuts (4), pin assembly (3), 64 flat washers (2), and 32 screws (1).
4-80
|