|
| |
TM 10-4320-324-14
4-19. Left Hand Side Panels Repair/Replacement (CONT).
(3)
Remove two nuts (10), two lockwashers (11),
four flat washers (12), and two screws (13).
(4)
Remove two nuts (14), two lockwashers (15),
two flat washers (16), and left rear post (17).
(5)
Remove three nuts (18), three lockwashers
(19), six flat washers (20), three screws (21),
and lower sill (22).
(6)
Remove two self locking nuts (23), two flat
washers (24), two screws (25), and sill
stiffener (26).
(7)
Remove four nuts (27), four lockwashers (28),
eight flat washers (29), four screws (30), and
door seal angle (31).
(8)
If damaged, remove door seal (32) from angle
(31).
b.
Cleaning/Inspection.
(1)
If door seals are removed, scrape remaining
residue from sills and post.
(2)
Inspect all sheet metal parts for holes, cracks,
deformations, or other obvious damage.
c.
Installation.
(1)
Install door seal angle (31) with four screws
(30), eight flat washers (29), four new
lockwashers (28), and four nuts (27)
(2)
Install sill stiffener (26) using two screws (25),
two flat washers (24), and new two self
locking nuts (23).
(3)
Install lower sill (22) using three screws (21),
six flat washers (20), three new lockwashers
(19), and three nuts (18).
4-68
|
