|
| |
TM 10-4320-324-14
CAUTION
When tightening fasteners to secure covers and retainers, stop when cover material just begins to distort.
Overtightening may damage covers or retainers.
(4) Install discharge valve cover support (39), discharge valve cover (38), and three retainers (36 and 37) using
seven screws (35), 14 flat washers (34), seven lockwashers (33), and seven nuts (32).
(5) Install 14 screws (31), 30 flat washers (29 and 30), 14 lockwashers (28), and 14 nuts (27).
(6) Install retainer (26) using five screws (25), ten flat washers (24), five lockwashers (23), and four nuts (22).
4-59
|
