|
| |
TM 10-4320-324-14
(5) Remove self-locking nut (23), flat washer (24),
spacer (25), rubber washer (26), door stop (27),
screw (28), and door stop link (29) from right
rear door stop bracket (30).
(6) Remove two nuts (31), two lockwashers (32),
four flat washers (33), two screws (34), and door
stop bracket (30), from right rear door (35).
(7) Remove four nuts (36), four lockwashers (37),
eight flat washers (38), four screws (39), and
hinges (40) from right rear door (35).
(8) If damaged, remove door seal (41).
c.
Cleaning/Inspection.
(1) If door seals are removed, scrape off remaining
residue.
(2) Inspect lock paddles for proper operation.
Replace if defective.
(3) Inspect door stop link for cracks or bends.
Replace if defective.
(4) Inspect door for holes, deformation, or other
obvious damage. Replace if defective.
4-47
|
