|
| |
TM 10-4320-324-14
(5) Remove self-locking nut (23), flat washer (24),
spacer (25), rubber washer (26), door stop (27),
screw (28), and door stop link (29) from door
stop bracket (30).
(6) Remove two nuts (31), two lockwashers (32),
four flat washers (33), two screws (34), and door
stop bracket (30) from left front door (35).
(7) Remove four nuts (36), four lockwashers (37),
eight flat washers (38), four screws (39), and
hinges (40) from left front door (35).
(8) If damaged, remove door seal (41).
c.
Cleaning/Inspection.
(1) If door seals are removed, scrape off remaining
residue.
(2) Inspect paddle latches for proper operation.
Replace if defective.
(3) Inspect door stop link for cracks or bends.
Replace if defective.
(4) Inspect door for holes, deformation, or other
obvious damage. Replace if defective.
4-41
|
