|
| |
TM 10-4320-316-14
(3) Allow parts to dry.
c. Inspection. Inspect access cover for cracks or corrosion.
d. Repair. Repair is limited to replacement of parts found defective during inspection.
e. Installation.
(1) Install ident plate (5) and two rivets, if removed.
(2) Install new foam insulation (3) if removed. Refer to Appendix F for manufacturing instructions.
(3) Install access panel (2) and four screws (1) onto unit.
Figure 4-7. Access Cover Repair and Replacement.
4-29
|
