|
| |
TM 10-4320-316-14
Table 4-3. Unit Troubleshooting. - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
8. RECOIL STARTER ROPE BINDS.
Step 1. Check for defective recoil starter.
Remove and inspect recoil starter. (See para. 4-33.)
Replace recoil starter if defective.
If recoil starter is not defective, proceed to Step 2.
Step 2. Check for defective pump assembly.
Inspect pump assembly for proper operation. (Refer to para. 4-26.)
If pump assembly is defective, repair or replace it.
If pump assembly is not defective, notify Direct Support Maintenance.
9. ENGINE CRANKSHAFT DOES NOT TURN AS THE ROPE IS PULLED.
Replace recoil starter. (Refer to para. 4-33.)
4-14
|
