|
| |
TM 10-4320-316-14
2-10. PREPARATION FOR MOVEMENT. When the DED pump assembly is to be moved, the services of unit
maintenance shall be employed for the necessary preparations. For general preparation of the DED pump assembly for
movement, perform the following steps (Refer to Figure 2-3).
a.
Disconnect suction hose from DED pump assembly inlet pipe (1).
b.
Disconnect discharge hose from DED pump assembly outlet pipe (2).
c.
Open pump drain cock on the bottom pan frame and allow all water to drain from pump unit.
2-11. DECALS AND INSTRUCTION PLATES. To assist the operator in the use of the DED pump assembly, various
decals and information plates have been placed on the unit. The location of each of these decals or instruction plates
and the wording of each one is shown in Figure 2-6.
Figure 2-6. Decals and Instruction Plates. (Sheet 1 of 2).
2-18
|
