|
| |
TM10-4320-316-14
5-9.
REGULATOR BRACKET ASSEMBLY REPAIR, ADJUSTMENT, AND
REPLACEMENT. - Continued.
d.
Installation.
(1)
Install nut (15) and bolt (14).
(2)
Install nut (12) and adjusting bolt (11).
(3)
Install regulator coil spring (8).
(4)
Attach return spring (5) to the governor lever (6) and to regulator lever (4).
(5)
Attach regulator spring (4) to the second hole from the left on the governor lever (2) and connect
spring to second hole from the left on regulator lever (3).
(6)
Mount regulator lever (4) to regulator bracket (3) using the locking nut (9). Secure with self-locking nut
(10).
(7)
Mount regulator bracket assembly (3) with mounting bolts (2 and 1).
(8)
Lubricate all moving parts with lubricating oil.
e.
Adjustment.
CAUTION
Do not operate engine and pump if all water has been removed from pump.
Pump will be seriously damaged if it is operated without water in the pump body.
(1)
Check that engine RPM is 3,650.
(2)
Loosen nut (15) and adjust bolt (14) until engine operates at 3,650 RPM.
(3)
When engine RPM is correct, tighten nut (15) to hold adjusting bolt (14) into position and install new
wire (13) to seal adjustment.
5-12/(5-13 Blank)
|
