|
| |
TM10-4320-316-14
4-35.
LUBE OIL STRAINER REPAIR AND REPLACEMENT.
This Task Covers:
a.
Removal
b.
Repair
c.
Installation
Initial Setup:
Tools Required
Tool Kit, General Mechanic's (Appendix B, Item 1)
Materials Required
Diesel Fuel (Appendix E, Item 6)
O-ring, (Refer to TM10-4320-316-24P)
Equipment Condition
DED pump assembly shut down and cool.
Outlet enclosure removed (see paragraph 4-23).
a.
Removal. (Refer to Figure 4-28).
(1)
Drain oil from engine (Refer to LO10-4320-316-12).
(2)
Remove hex head bolt (1) from crankcase (2).
(3)
Remove lube oil strainer (3) and O-ring (4). Discard O-ring.
b.
Repair.
Repair is limited to replacement of defective parts.
c.
Installation.
(1)
Lubricate new O-ring (4) with engine oil and insert into groove on lube oil strainer (3).
(2)
Insert lube oil strainer (3) into hole in crankcase (2).
(3)
Install hex head bolt (1) to attach lube oil strainer (3) to crankcase (2).
(4)
Fill engine with 0.75 quart of proper engine oil (Refer to LO10-4320-316-12).
4-80
|
