|
| |
TM 10-4320-316-14
(2) Position fuel cock (7) with a new O-ring (11) over the two studs. Be sure that the shut off handle on the fuel
cock points away from the engine.
(3) Install washer (10), nut (9), and nut (8) onto fuel cock (7).
(4) Replace fuel line hose (6) and clamp (5) onto fuel cock (7).
(5) Install drain plug (4).
(6) Replace strainer (2) and fuel tank cap (1) onto fuel tank (3).
(7) Check for leaks after refilling. Tighten any loose fasteners or clamps causing leaks.
Figure 4-21. Fuel Cock and Fuel Filter, Outlet Replacement.
4-67
|
