|
| |
TM 10-4320-311-14
4-14. Replace Drum Suction Stub Unloader Assembly.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
Equipment
Tool Kit, General Mechanics (Item 1,
Condition
Appendix B, Section III)
Para
2-5
Drum suction stub unloader
Pipe Wrench (2) (Item 2,
assembly removed.
Appendix B, Section III)
Materials/Parts
Gasket, MS27030-5
REMOVAL: Refer to Figure 4-6.
a.
Swing coupling (1) levers outward 180 degrees and remove hose coupling (1) from 90-degree elbow (3)
b.
Remove and discard gasket (2).
c.
Turning counterclockwise, remove 90-degree elbow (3) from suction unloader stub (4).
INSTALLATION:
a.
Turning clockwise, secure 90-degree elbow (3) to suction unloader stub (4).
b.
Install gasket (2) Into coupling (1).
c.
Install coupling (1) onto 90-degree elbow (3) fitting.
d.
Swing coupling (1) levers Inward 180 degrees to secure coupling (1) to 90-degree elbow (3).
4-21
|
