|
| |
TM 10-4320-311-14
4-12. Repair/Replace Discharge Hose Assembly.
This task covers:
a.
Removal
b.
Repair
c.
Installation
INITIAL SETUP
Materials/Parts
Equipment
Condition
Gasket, MS27030-5
Para
2-5
Discharge hose assembly
removed from pump.
Figure 4-4. Discharge Hose Assembly
REMOVAL: Refer to Figure 4-4.
a.
Remove dust cap (2) from discharge hose assembly (1).
b.
Remove dust plug (3) from discharge hose assembly (1).
c.
Remove chain (4) from dust cap (2) and dust plug (3)
d.
Remove and discard two gaskets (5).
REPAIR:
Replace all worn or damaged components.
INSTALLATION:
a.
Install gaskets (5) into coupling (6) and dust cap (2).
b.
Attach chain (4) to dust cap (2) and dust plug (3).
c.
Secure dust plug (3) to discharge hose assembly (1).
d.
Secure dust cap (2) to discharge hose assembly (1).
4-19
|
