|
| |
TM 10-4320-311-14
4-10. Repair/Replace Nozzle Assembly.
This task covers:
a.
Disassembly
b.
Repair
c.
Assembly
INITIAL SETUP
Tools
Equipment
Condition
Tool Kit, General Mechanics (Item 1,
Para
Appendix B, Section III)
Pipe Wrench (2) (Item 2,
2-5
Nozzle assembly removed from
Appendix B, Section III)
discharge hose assembly.
Materials/Parts
Diesel fuel (Item 2, Appendix E,
Section II)
O-ring
Gasket, MS27030-5
DISASSEMBLY: Refer to Figure 4-2.
a.
Remove dust plug (1) and coupler (2) from body (3). Remove dust plug (1) and gasket (4) from coupler (2)
Discard gasket (4).
b.
Remove nozzle cap assembly (5) from body (3)
c.
Remove two cap chain links (6), chain (7), and compression spring (8) from cap (9) and body (3).
d.
Remove spout (10), nozzle strainer (11), and O-ring (12) from body (3). Discard O-ring (12).
e.
Remove ground wire plug (13) from cable (14).
f.
Remove cable (15) by removing plug screw (16) from bushing (17).
g.
Remove bushing (17) from body (3).
h.
Loosen setscrews (18) and remove cables (14 and 15) from clamp (19).
4-15
|
