|
| |
TM 10-4320-311-14
4-32. Replace/Service/Inspect Lube Oil Strainer
This task covers:
a)
Removal
c)
Inspection
b)
Service
d)
Installation
INITIAL SETUP
Tools
Equipment
Condition
Tool Kit, General Mechanics (Item 1,
Para
Appendix B, Section III)
4-19
Sound enclosure front panel
Materials/Parts
assembly removed.
Diesel fuel (Item 2, Appendix E,
Section II
O-ring, 24341-000224
Figure 4-36. Lube Oil Strainer
REMOVAL: Refer to Figure 4-36.
a.
Remove hex head bolt (1) from crankcase.
b.
Remove lube oil strainer (2) and O-ring (3) Discard O-ring.
SERVICE:
a.
Thoroughly clean strainer in fuel
b.
Shake dry and rinse thoroughly again In clean fuel.
c.
Continue until all dirt has been removed from the strainer
d.
Dry thoroughly to remove fuel.
e.
If strainer cannot be completely cleaned, then it should be replaced
4-67
|
