|
| |
TM 10-4320-311-14
(8)
Pull enough rope through T-handle (3) to make a knot.
(9)
Remove bracing screwdriver and let reel rewind rope slowly.
(10)
Check the starter for proper operation before installing the starter on the engine.
INSTALLATION:
a.
Check recoil starter (5) for operation before installing it on the engine.
b.
Position recoil starter (5) assembly on the cooling case cover as noted at removal. Push the cam back into the
assembly if it is extended.
c.
Install four bolts (4).
d.
Untie the temporary knot in the rope and feed the rope through sound enclosure front panel grommet (2)
e.
Install T-handle (3) on rope (1) Thread enough rope through the T-handle to make a knot.
f.
Tie a knot In the rope and pull it against the hole in the T-handle. Stuff excess rope into the T-handle slot.
g.
Check recoil starter for operation on the engine.
4-61
|
