|
| |
TM 10-3835-231-13
5-4. HOSE REPAIR (HOSES WITH BAND TYPE CLAMPS) - continued
(6)
When sufficiently tensioned, roll tool over hose, backing off tension handle 1/4 to 1/2 turn only. This will
vary depending on the clamp size. Do this until shear hook engages buckle edge.
(7)
Tighten knurled nut by hand securing buckle tightly between edge of hook and nose of adapter.
(8)
Place ratchet wrench on hex nut.
Figure 5-4. Final Band Installation
(9)
Operate wrench clockwise until band is sheared.
(10)
Install remaining clamps.
(11)
Install gaskets (7) into coupling (3) and cap (2). (See Fig 5-2.)
(12)
Attach cap (2) and plug (1) with key ring (5).
(13)
Place plug (1) and cap (2) in position and close cam arms.
5-4
|
