| |
TM 10-3835-231-13
4-42. PREPARATION FOR STORAGE. - continued
NOTE
To avoid double handling, it is recommended that the 6-inch transfer hoseline be
thoroughly inspected as it is cleaned and stored. This will avoid having to remove
the hoseline again at the inspection and preservation area.
(d)
Use of the Displacement and Evacuation Kit. The displacement and evacuation kit is used for
removal of fuel and evacuation of the small residual quantity of fuel, vapor, and any air within the
hoseline section. The hoseline section must be completely free of any fluid or air. When the hoseline
section has been evacuated, collapsed, and capped, it is ready for packing. The displacement and
evacuation kit consists of the following:
ITEM
QTY
DESCRIPTION
NO.
1.
1
Ball Inlet Assembly
2.
1
Ball Receiver Assembly
3.
2
Displacement Ball
4.
8
6 inch Coupling
5.
24
Grooved End Fitting Cap
6.
1
Ejector
7.
1
Coupling Clamp Tool
8.
1
1 inch Ball Valve:
9.
2
1 inch NPT Quick Disconnect Half Coupling
10.
1
6 inch Pipe Coupling
11.
1
3/4 inch NPT Quick Disconnect Half Coupling
12.
1
Storage Chest
4-74
|