|
| |
(10)
(11)
(12)
(13)
T M 1 0 - 3 8 3 5 - 2 1 9 - 14
Inspect spreader bar (4) for cracks, or breaks and replace if damaged.
Slide lower leg assemblies support rings (7) onto spreader bar (4).
Align rings (7) between U-bolt holes and install u-bolts (3) through thimbles (8) of upper leg assemblies
(5).
Install U-bolts (3) through holes in spreader bar (4) and secure with four washers (2) and eight nuts (1).
Torque nuts to 165 ft-lbs (20.29 m).
Figure 6-1. Sling Assembly, Repair.
6 - 3
|
