KEY - LO-10-4320-343-120002

LO 10-4320-343-12

Maintenance levels are indicated on the pictures as (C) for operator/crew or (O) for unit level.

Lube intervals are indicated on the pictures as Q for quarterly, S for semiannually, or a number followed by H for

Clean parts with dry cleaning solvent (SD), type II, or equivalent. Dry before lubricating.

Oil filters shall be serviced/cleaned/changed as applicable, when:

a. They are known to be contaminated, or clogged;

b. Service is recommended by AOAP laboratory analysis, or

c. At prescribed hardtime intervals.

Engine oil must be sampled quarterly as prescribed by DA Pam 738-750.

Before you start your lube service

NEVER

ALWAYS

a. Use wrong type/grade grease.

a. Clean grease fittings before lubrication.

b. Use too much lubricant.

b. Use the lubrication order as your guide.

KEY

Card 2 of 7