Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: Drain Hose Assembly (Excluding Tank, NSN 5430-00-268-8187)
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

TM 5-5430-210-12 to start the screws into the tank fitting. (12)  Assemble  1/4  -  20  x  3/4  screws  (3)  and washers  (4).  Insert  screws  through  oval  closure plate (5) and into tapped holes in the tank fitting, Tighten to 30 inch-pounds. (13)  Place   elbow   (1)   onto   flanged   adapter (11). Pull inward on the cam-lever arms to lock the two items together. 3-8.  Drain  Hose  Assembly  (Excluding  Tank, NSN 5430-00-268-8187). a. Disassembly. (1) Remove  screws  (1,  fig.  B-3)  and  washers (2)   which   hold   the   fitting   assembly   to   the   col- lapsible  tank  fitting. (2) Remove  drain  fitting  (3)  with  remaining hardware attached. (3) Remove preformed packing (4) from pack- ing groove in the tank fitting. (4) Disconnect  valve  (5)  from  drain  hose  (6) by  turning  valve  in  a  counterclockwise  direction until threads disengage. (5) Disconnect  drain  hose  (6)  from  drain  fit- ting (3) by rotating the hose in a counterclockwise direction until threads disengage. (6) To  remove  security  chain  (9)  from  drain plug (7), remove the roundhead screw (8). b. Cleaning and Inspection. W A R N I N G Drycleaning solvent, P-D-680, used to clean parts is potentially dangerous to personnel   and   property.   Avoid   re- peated  and  prolonged  skin  contact. Do not use near open flame or exces- sive heat. Flash point of solvent is 100 degrees F -138 degrees F (38 degrees C -59 degrees C) (2) Clean  all  parts  with  drycleaning  solvent (Item 1, App. F) and dry thoroughly. (2) Clean out the packing groove thoroughly, (3)  Inspect  all  mechanical  parts  for  cracks, dents,  breaks  or  wear.  Replace,  or  repair,  if  un- serviceable. (4) Carefully  inspect  the  packing  for  deterio- ration,  distortion,  cracks  or  breaks.  Replace  when serviceability is doubtful. c. Reassembly. (1) Attach security chain (9, fig. B-3) to drain plug (7) with roundhead screw (8). (2) Assemble  drain  hose  (6)  to  the  drain  fit- ting by engaging the threads and rotating the hose in  a  clockwise  direction  until  they  are  tightly  join- ed. (3) Attach  valve  (5)  to  drain  hose  (6)  by  en- gaging the thread and rotating the valve in a clock- wise  direction  until  they  are  tightly  joined. (4) Place preformed packing (4) into the pack- ing  groove  on  tank  fitting. (5)  Place   drain   fitting   (3)   on   tank   fitting, Align the bolt holes. (6) Insert screws (1) with washers (2) through bolt holes and tighten to 30 inch-pounds. (7)  Insert  S-hook  of  the  security  chain  (9) under the head of one of the bolts (1) and tighten to 30 inch-pounds. 3-9.  Filler  and  Discharge  Valve  Assembly  (All Tanks) a. Disassembly. (1) Remove hose coupling gasket (1, fig. B-4) from inside of quick disconnect coupling on hose as- sembly (2). (2) Disconnect hose assembly (2) from flanged gate  valve  (14)  by  pulling  the  cam-lever  arms  out- ward  on  the  female  quick  disconnect  coupling  (7) and withdraw the hose assembly (2). (3) Remove  quick  disconnect  coupling  gasket (3) from inside the coupling (7). (4)  Remove  hexagon  nuts  (4)  from  hexagon head  cap  screws  (5).  Withdraw  the  screws  and  re- move the washers (6). (5) Remove  female  quick  disconnect  coupling (7) and gasket (8) from the face of the valve. (6) Remove  hexagon  nuts  (9)  from  the  hexa- gon  head  screws  in  the  opposite  end  of  gate  valve (14).  Withdraw  hexagon  head  cap  screws  (10)  and remove washers (11). (7)  Remove  male  flanged  adapter  (12)  and flange  gasket  (13). (8) Refer  to  paragraph  3-10  for  control  valve maintenance. b. Cleaning and Inspection. W A R N I N G Drycleaning solvent, P-D-680, used to clean parts is potentially dangerous to personnel   and   property.   Avoid   re- peated  and  prolonged  skin  contact. Do not use near open flame or exces- sive heat. Flash point of solvent is 100 3-8

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business