|
| |
TM 9-2350-253-34-2
4-1. ENGINE ASSEMBLY REPAIR (continued).
50.
Install two push rod guides (26) over eight push rods (35), and secure to two cylinder heads (28) with 10 screws
(25).
51.
Install eight rocker arms (22) and rocker arm balls (23) on two cylinder head (27) with eight nuts (24). Tighten
nuts (23) between 4 and 10 Ib-ft (5.2 to 13 N•m).
52. Install four standpipe vents (27) in two cylinder heads (28).
NOTE
When using some maintenance stands, baffles may not be installed until after engine is
removed from stand.
53. Install two baffles (21) on engine (1) with screw (20).
4-32
|
