|
| |
TM 9-2330-398-24
3-44.
R, P, M, AND G VALVE ASSEMBUES REPAIR (continued).
c.
ASSEMBLY
NOTE
The only difference in the four valves is different size disc and sleeves.
When assembling disc and sleeves, verify that size is correct.
1.
Install disc (14) and sleeve (13) in valve body
(12).
2.
Install new bearing (18) on bottom stem (16).
3.
Install bottom stem (16) and new preformed
packing (17) in valve body (12) with new spring
pin (15).
4.
Install split bearing (10), two new preformed
packings (9 and 11), valve seal (8), and top seal
(6) on valve stem (7). Install valve stem (7) in
valve body (12).
5.
install stop plate (5) on valve body ’(12) with two
screws (19).
6.
Install new cotter pin (2), top pin (3), handle (1),
and dip (4) on valve body (12).
FOLLOW-ON MAINTENANCE:
•
Install R, P, M, and/or G valve assemblies (para 2-135).
•
Disconnect ground (refer to TM 9-2330-398-10).
3-129/(3-130 blank)
|
