|
| |
TM 9-2330-398-24
3-26.
ENGINE SHROUDING REPLACEMENT (continued).
e.
BOTTOM CYLINDER PAN REMOVAL
1.
Remove top air housing cover (sub-para 3-26a), blower housing (sub-para 3-26b), air shutter assembly (sub-para 3-
26c), and rear cylinder housing (sub-para 3-26d).
2.
Remove four screws (49) and bottom cylinder pan (46) from engine (1).
f.
FRONT CYLINDER HOUSING REMOVAL
1.
Remove air shutter assembly (sub-para 3-26c).
2.
Remove three screws (42), engine door panel (47), and front cylinder housing (41) from engine (1).
g.
AIRFLOW BAFFLE REMOVAL
1.
Remove air shutter assembly (sub-para 3-26c).
2.
Remove screw (45) and two airflow baffles (43 and 44) from cylinder heads.
h.
AIRFLOW BAFFLE INSTALLATION
1.
Install two airflow baffles (43 and 44) and screw (45) on cylinder heads.
2.
Install air shutter assembly (sub-para 3-261).
i.
FRONT CYLINDER HOUSING INSTALLATION
1.
Install front cylinder housing (41) engine door panel (47), on engine with three screws (42).
2.
Install air shutter assembly (sub-para 3-261).
j.
BOTTOM CYLINDER PAN INSTALLATION
1.
Install bottom cylinder pan (46) on engine with four screws (49).
2.
Install rear cylinder housing (sub-para 3-26k), air shutter assembly (sub-para 3-261), blower housing (sub-para 3-
26m), and top air housing cover (sub-para 3-26n).
k.
REAR CYUNDER HOUSING INSTALLATION
1.
Install rear cylinder housing (51) and engine door panel (47) on engine (1) with three screws (48).
2.
Install air shutter assembly (sub-para 3-261).
3-81
|
