|
| |
TM 9-2330-398-24
3-15. HOSE REEL CABINET ACCESS DOOR REPAIR (continued).
4.
Remove 12 self-locking nuts (13), washers (14), and screws (17) from four hinges (16). Remove two doors (5)
from frame (15). Discard self-locking nuts.
NOTE
Hinges are welded to frame. Remove hinges only if damaged.
5.
Break welds on four hinges (16) with steel chisel and remove from frame (15). Grind surfaces smooth.
b.
INSPECTION
Inspect door, door hinges, springs, cylinders and frame for cracks, dents, excess wear and broken welds. Replace
worn or damaged parts as required.
c.
ASSEMBLY
NOTE
Perform step 1 only if hinges were removed.
1.
Tack-weld four new hinges (16) to frame (15) in same locations as original welds.
2.
Install two hose reel cabinet access doors (5) on four hinges (16) with 12 new self-locking nuts (13), washers (14),
and screws (17).
3.
Install four cylinders (12) on two doors (5) and frame (15) with eight new self-locking nuts (11) and washers (10).
4.
Install two bumpers (8) on two doors (5) with four screws (6), eight washers (7), and four new self-locking nuts (9).
5.
Install two lever lock-releases (1) on two doors (5) with eight screws (2), washers (3), and new self-locking nuts
(4).
FOLLOW-ON MAINTENANCE:
• Disconnect ground (refer to TM 9-2330-398-10).
3-47
|
