|
| |
TM 9-2330-398-24
2-120. FILTER SEPARATOR FILTER ELEMENTS REPLACEMENT (M & E INDUSTRIES MODEL) (continued).
5.
Remove seven nuts (18), lockwashers (19), and washers (20), and retaining plate (21) from five filter assemblies
(23). Discard lockwashers.
6.
Starting with lower filter assembly (23) nearest to service opening (10), remove spring tension clip (22) and pull
filter assembly (23) to the right until it drops down and can be removed from filter separator (1) through service
opening (10).
7.
Repeat step 6 to remove remaining four filter assemblies (23).
8.
Remove retainer nut (11) from filter element (12), and slide filter element (12) off guide pipe and out of filter
separator (1).
9.
Repeat step 8 to remove remaining 14 filter elements (12).
b. DISASSEMBLY
1.
Remove filter adapter assembly (30), three filter elements (26), and fuse monitor bracket (24) from filter assembly
(23).
2.
Remove three gaskets (27, 29, and 31) and monitor mounting plate (28) from filter adapter assembly (30).
Discard gaskets.
2-260
|
