|
| |
TM 9-2330-398-24
2-120. FILTER SEPARATOR FILTER ELEMENTS REPLACEMENT (M & E INDUSTRIES MODEL) (continued).
1.
Position suitable container in place under filter separator (1). Open manual drain valve N (2) to remove any fluid
from filter separator (1). Close manual drain valve N (2) when filter separator (1) is drained.
Note
Note location of antipilferage seals for ease of installation.
2.
Cut two antipilferage seals (6) from screws (9) at top and bottom of access cover (8). Discard seals.
3.
Remove 12 nuts (5) and screws (9) and 24 washers (3) and 12 lockwashers (4) from access cover (8) and
mounting flange of filter separator (1). Discard lockwashers.
4.
Remove access cover (8) and gasket (7) from filter separator (1). Discard gasket.
2-259
|
