|
| |
TM 9-2330-398-24
2-110. FUEL FILTER HEAD AND HOSE ASSEMBLY REPLACEMENT (continued).
6.
Remove pipe elbow assembly (3) from fuel filter head (9).
7.
Remove three bolts (4) and lockwashers (5) from fuel filter head (9). Discard lockwashers.
NOTE
Perform steps 8 and 9 only if removing hose assemblies.
8.
Remove one end of hose assembly (1) from fuel pump (11), if necessary.
9.
Remove other end of hose assembly (2) from fuel pump (10), if necessary.
b.
INSTALLATION
NOTE
Perform steps 1 and 2 only if installing hose assemblies.
1.
Install hose assembly (2) on fuel pump (10), if
hose assembly (2) was removed.
2.
Install hose assembly (1) on fuel pump (11), if
hose assembly (1) was removed.
3.
Install pipe elbow assembly (3) on fuel filter head
(9).
4.
Install hose assembly (2)
on
pipe
elbow
assembly (3).
5.
Install hose assembly (1)
on
pipe
elbow
assembly (3).
6.
Install pipe elbow (8) on fuel filter head (9).
7.
Install hose assembly (7) on injection pump (6).
8.
Install hose assembly (7) on pipe elbow (8).
9.
Install three bolts (4) and new lockwashers (5)
on fuel filter head (9).
FOLLOW-ON MAINTENANCE:
•
Install primary and secondary fuel filters (para
2-109).
•
Connect negative battery cable (para 2-33).
•
Disconnect ground (refer to TM 9-2330-398-
10).
2-231
|
