|
| |
TM 9-2350-253-34-2
2-79. HOSE REEL CABINET DOOR CYLINDER ASSEMBLY REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
•
General mechanic's tool kit (Item 4, Appendix B)
•
Semitrailer uncoupled (refer to TM 9-2330-39-10).
•
Semitrailer bonded and grounded (refer to
Materials/Parts:
TM 9-2330-39&10).
•
Self-locking nut (2) (Item 177, Appendix F)
a.
REMOVAL
WARNING
Support hose reel cabinet door before removing cylinder assembly. Cabinet door
can close suddenly, causing Injury to personnel or damage to equipment
NOTE
All four hose reel cabinet door cylinder assemblies are replaced the same way.
1.
Open hose reel cabinet door (refer to TM 9-2330-398-10).
2.
Remove two self-locking nuts (3) and washers (2) and hose reel cabinet door cylinder assembly (4) from hose
reel cabinet (5) and cabinet door (1). Discard self-locking nuts.
b.
INSTALLATION
1.
Position cylinder assembly (4) in place in
hose reel cabinet (5) and on cabinet door
(1).
2.
Secure cylinder assembly (4) with two new
self-locking nuts (3) and washers (2).
3.
Close hose reel cabinet door (refer to TM 9-
2330-39810).
FOLLOW-ON MAINTENANCE:
•
Disconnect ground (refer to TM 9-2330-398-10).
2-174
|
